D100 Digital Gas Sensors Module
1,000.00৳
The D-100 digital gas sensor is used for 24-hour continuous online monitoring of gas concentrations on site. The sensor part uses gas sensors of internationally renowned brands and the main detection principles are: electrochemical, infrared, catalytic combustion, thermal conductivity, PID photoionisation, etc.
⛟ Stock products delivery time 1-3 working days. 🔥
✈ Out-of-stock products delivery time 10-20 working days. 🚀
☎️ Contact Us for any inquiry
Description
Details
D100 Plug and Play Digital Gas Sensors
In order to solve the problems of limited replacement of core components, limited size, various types of gas detection and incompatibility of various brands of gas sensors, to cooperate with system integrators to develop industrial process control systems, environmental online monitoring systems and industrial internet gas analysis systems, and to solve the problem of integration of customers’ independent systems, the D-100 plug-and-play digital gas sensor and the six-channel signal acquisitionintelligent motherboard M-600
•The D-100 digital gas sensor module is compact in size and simple to apply. The specific principle is: signal processing and intelligent calculation of different brands of sensors, then temperature and humidity compensation, and finally data calibration with standard gases.
•No secondary calibration is required, the standard RS485 or TTL digital signal of the sensor can be read directly, or a single or multiple 6-channel signal acquisition intelligent motherboard (M-600) can be selected for unified acquisition, hot-swappable support, the sensor can be replaced by itself after expiry, no professional operation or guidance is required.
arameter
|
Detection of gases
|
Over 500 gases including toxic gases, oxygen, carbon dioxide, flammable and explosive gases, TVOC, etc. Free combination of six
different gases (can be added) |
|
Meteorological parameter testing
|
Temperature: -40℃~120℃, Humidity: 0~100%RH, Pressure: 30-140Kpa, Wind speed, wind direction, noise, illumination, rainfall, etc.
|
|
Particulate matter detection
|
PM2.5/PM10: 0~1000ug/m3, 0-5mg/m3, selectable counting mode PC/L or mass mode
|
|
Detection range
|
0～1、10、100、1000、5000、50000ppm、100MG/L、100%LEL、20%、50%、100%Vol Optional
Refer to the table, other ranges can be ordered |
|
Resolution
|
0.001ppm（0-10ppm High accuracy）/0.01ppm（0～10 ppm）；0.01ppm（0～100 ppm），0.1ppm（0～1000 ppm），1ppm（0～5000 ppm以上）；0.01MG/L；0.1%LEL；0.01%，
0.001%Vol Refer to the table, other ranges can be ordered |
|
Detection principle
|
Electrochemical, catalytic combustion, infrared, thermal conductivity, semiconductor, PID photoionisation, etc., depending on
range, site environment and user requirements |
|
Sensor life
|
Electrochemistry 2-3 years, catalytic combustion 2-3 years, IR 5-10 years, thermal conductivity 2-5 years, semiconductors 2-3
years, PID 2 years |
|
Detection accuracy
|
≤±3%F.S (Depending on the sensor, higher precision can be ordered)
|
|
Signal output
|
Sensor: TTL or RS485, one of two options, specify on order, intelligent motherboard: RS485, optional RS232/TTL/USB/voltage output
|
|
Operating environment
|
Temperature: -40℃～+70℃, Humidity: ≤10～95%RH (conventional) non-condensing occasions, Pressure: 0.1MPa±20%
|
|
Operating voltage
|
Sensor 5VDC, Main board: 12 to 35VDC DC
|
|
Operating mode
|
Plug-and-play, diffusion measurement; pumped or flow-through measurement options
|
|
Power consumption
|
Depending on the sensor principle (0.05W~1W), ultra-low power models are available on request
|
|
Other
|
Full range temperature and humidity compensation, intrinsically safe circuit design
|
|
Applications
|
Petroleum, chemical safety, pharmaceuticals, environmental protection, gas distribution, storage, flue gas analysis, air quality
monitoring and other occasions. |
Application
This new intelligent digital gas sensor can be widely used in petroleum, chemical, environmental protection, metallurgy, refining, gas distribution, biochemical and pharmaceutical industries, such as online monitoring of environmental gases, industrial process control, industrial inspection robots, drones, atmospheric monitoring, etc.
https://youtu.be/NVZ0ifzKWWw
Shipping & Returns Policy
Shipping Information
Dhaka Only: Same-day or next-day delivery within Dhaka city limits and cost only ৳80 TAKA.
Out Of Dhaka: 1–3 working days for most locations within Bangladesh and cost only ৳120 TAKA.
Know more details.
Out Of Dhaka: 1–3 working days for most locations within Bangladesh and cost only ৳120 TAKA.
Know more details.
Return Policy
You may return items purchased from Meter BD Shop within 7 days of receiving the product.
To be eligible for a return, the product must meet the following conditions:
1. Unused, 2. In the original packaging & 3. Proof of purchase.
Reviews
There are no reviews yet.