TSS Portable Hand-held Turbidity, Suspended Solids, and Sludge Level System
500.00৳
⛟ Stock products delivery time 1-3 working days. 🔥
✈ Out-of-stock products delivery time 10-20 working days. 🚀
☎️ Contact Us for any inquiry
TSS Portable Hand-held Turbidity, Suspended Solids, and Sludge Blanket Level Instrument
Compact instrument for analytical determination by continuous measurement mode with integration time setting.
Adjustment of up to 5 measuring points, storage of measuring values with name, date and time. Shockproof.
Combined multiple beam alternating light method with infrared diode system and beam focusing; wavelength 860 nm. The measurement ranges for turbidity and suspended solids are: 0.001 – 9999 FNU and 0.001 – 400 g/L respectively.
Applications:
- Municipal Water
Benefits
Three Parameters in One Instrument
The Hach TSS Portable Hand-held Turbidity, Suspended Solids, and Sludge Blanket Level Instrument’s unique multi-beam alternating light method with infrared diode system gives it a broad measuring range for both turbidity and suspended solids in one portable handheld instrument.
Multiple Calibration Curves for Convenience
It stores up to four different calibration curves for suspended solids and one for turbidity. There’s no need for constant re-calibration for different locations or types of sludge.
Easy Sludge Blanket Levels
The sludge blanket level can be measured by setting the units to mg/L, g/L or percent. Calibrate the instrument and then slowly lower the sensor into the clarifier. The suspended solids concentration will significantly increase as it reaches the sludge blanket level. Once the blanket level is reached, examine the sensor cable which is marked every meter to determine the sludge blanket level depth from the water surface.
Air Bubble Compensation for Accuracy
The instrument software automatically compensates for air bubbles to prevent its influence on the measurement. Turbidity is pre-calibrated with a calibration curve stored in the instrument. For suspended solids, each of the calibration curves can be closely adjusted to the laboratory results because each calibration curve can use up to three points per curve plus a zero value.
Durable Materials for Long Life
The probe is made of polished stainless steel with a scratch-resistant sapphire window to withstand harsh environments. Polished stainless steel helps keep particles from sticking to the surface of the probe. The internal memory stores up to 290 measuring values, including time, date, measurement, location, and homogeneity. Three operating modes are available: single, interval, or continuous.
Rechargeable Battery Power
With rechargeable batteries, the Hach TSS Portable Hand-held Turbidity, Suspended Solids, and Sludge Blanket Level Instrument can provide up to one month of usage in typical measuring mode and up to four hours of continuous operation. Interval mode has automatic shut off between measurements for longer operation in the field. The battery status is always visible. The operating menu is user-friendly and is displayed on an easy-to-read LCD graphic display.
Specifications
Technical Attributes
| Cable Length | 10 m (32.8 ft.) cable with marks for distance |
| Current Input | Approx. 60 mA |
| Diameter | 40 mm |
| Dimensions | Probe (Ø X L) 40 mm x 29 cm (1.57 x 11.42 in.)|Meter (H X W X D): 110 x 230 x 40 mm (4.33 x 9.06 x 1.57 in.)|Case L: 450 mm (17.7 in) |
| Display | Alphanumerical display, 4 rows of 16 characters |
| Kit? | Yes |
| Length | 290 mm |
| Material | Sensor Body: stainless steel; Probe: stainless steel; Sensor Window: sapphire |
| Measurement Modes | Continuous measurement, integration time settings 0 – 1000 seconds |
| Measuring Principle | Combined multiple beam alternating light method with infrared diode system and beam focusing.; Turbidity: 2-channel 90° scattered light measurement in accordance with DIN/EN 27027/ISO 7027; additional measurement value verification through six-channel multiple-angle measurement; Solids: Modified absorption measurement; six-channel multiple-angle measurement; |
| Measuring Range TSS | 0.001 – 400 g/L (upper range depending on sample characteristics) |
| Measuring Range Turbidity | 0.001 – 9999 FNU |
| Memory | Up to 290 measuring points |
| Operating Pressure | 0 to 10 bar (0 to 145 psi) |
| Operating Temperature Range | 0 – 60 °C |
| Power | Automatic shut down after 4 minutes (if no button has been pressed and no permanent measurement is activated) |
| Precision Suspended Solids | < 4 % ± 0.001 g/L , whichever is greater |
| Precision Turbidity | < 3 % or ± 0.02 NTU , whichever is greater |
| Pressure Range | Max. 10 bar |
| Protection Class | Probe IP68; Control unit IP 55 |
| Range | TSS 0.001 – 400g/L Turbidity 0.001 – 9999 FNU |
| Relative Humidity | 0 – 95 % |
| Resolution | Suspended Solids: 0.01 at 1 – 9.999 g/L |
| Resolution | Suspended Solids: 0.1 at 10 – 99.9 g/L |
| Resolution | Suspended Solids: 1 at greater than 100 g/L |
| Resolution turbidity | 0.01 @ 1 – 9.99 NTU |
| Resolution turbidity | 0.1 @ 10 – 99.9 NTU |
| Resolution turbidity | 1 at greater than 100 NTU |
| Resolution turbidity | 0.001 @ 0 – 0.999 NTU |
| Sensor Cable | 10 m |
| Warranty | 12 months |
| Weight | Probe: 3.5 lbs (1.6 kg); Meter: 1.2 lbs (0.54 kg) |
| What’s included? | Turbidity, Suspended Solids and Sludge Level probe, meter, rechargeable batteries, user manual, carrying case. The battery charger must agree with local and national safety regulations and may not be part of the shipment. If the charger is not part of the shipment, charge the batteries with a charger available in your country. Make sure that the charger agrees the battery specifications. |
| Width 2 | 450 mm |
Shipping Information
Out Of Dhaka: 1–3 working days for most locations within Bangladesh and cost only ৳120 TAKA.
Know more details.
Return Policy
You may return items purchased from Meter BD Shop within 7 days of receiving the product.
To be eligible for a return, the product must meet the following conditions:
1. Unused, 2. In the original packaging & 3. Proof of purchase.

Reviews
There are no reviews yet.