custom med lab pcr smart lab test ddrc of sale supplier factory

-Product Features:

(1)No DNA and RNA enzymes, no DNA and RNA;

(2)High-precision moulds ensure ultra-thin and homogeneous walls and excellent heat transfer,

allowing the reaction solution to reach the target temperature as quickly as possible and promoting

maximum sample amplification;

(3)The plates can be cut into 24- and 48-well plates and are clearly marked with vertical letters (A-H)

and horizontal numbers (1-12); the raised edges of the holes are suitable for heat sealing in aluminium moulds;

the flat top surface makes sealing easier and safer and can be sealed with qPCR sealing film or transparent octal caps;

(4)Original imported high quality plastic material and advanced processing technology, flat lid with very low light loss,

suitable for fluorescence qPCR, no heat-resolved material, no endotoxin;

(5)Suitable for most automated experimental instruments;

The 96-well function of the microplate reader is used to read the results of ELISA kits, so the use of the kits must be standardized.

Many hospitals use microplate readers to run at random rates. If the operating habits cannot be corrected in time, it will lead to bigger mistakes.

Therefore, the following matters should be paid attention to in the operation of the 96-well plate of the microplate reader:

1. When adding liquid with a liquid dispenser, the liquid addition head cannot be mixed.

2. Clean the circuit board and clean. If possible, use a washing machine to clean the plates to avoid cross-contamination.

3. According to the instructions of the kit, the reaction time should be accurate.

4. Do not touch the microplate during measurement. Take care to prevent the microplate from squeezing your hands during transportation.

5. Do not spill samples or reagents on or inside the instrument. Be sure to wash your hands when you are done.

6. If the samples or reagents used are harmful to contamination, toxicity and biological properties, the instructions for use of the kit must be strictly

followed to avoid injury to operators. Instruments must be cleaned and disinfected after contact with contaminated or infectious material.

7. Do not turn off the power during measurement.

8. For the deviation of the measurement results caused by the kit, the parameters should be modified according to the actual situation to achieve better results.