Rapid moisture analyzer

Application field:

This series of rapid moisture meters is applied to all industries that require rapid moisture determination. As long as it is in the form of granules, powders, flakes, or non-volatile liquids, it can be measured, such as grain, chemical, pharmaceutical, plastic raw materials, rubber, tobacco, tea, textiles, meat, food, starch, feed, coal, molding sand, sewage sludge, dairy industry, and so on;

Working principle:

The traditional moisture determination method usually uses oven drying, and the testing of a sample takes two to three or even three to four hours. Moreover, it also requires weighing on a balance and manual calculation to obtain the moisture value (moisture content) of the sample. The low efficiency of moisture determination using the oven method cannot meet the production needs of fast-paced enterprises. The Lucky Card Rapid Moisture Tester uses an efficient drying heater – a high-quality circular halogen lamp – to quickly and uniformly heat the sample, continuously drying the moisture of the sample. Throughout the measurement process, the instrument automatically displays real-time measurement results such as sample weight, moisture content, solid content, measurement time, heating temperature, etc.

This series of rapid moisture meters applies the principle of international oven drying method, and the measurement results have good consistency with the oven method moisture measurement. However, the work efficiency is much higher than that of the oven method moisture measurement. Generally, the sample can be measured in just a few minutes, so it is favored and praised by a large number of users.

Features:

Halogen light heating

Stainless steel heating chamber

Temperature and time can be set

The percentage of moisture content displayed

The percentage of dry residue

LCD touch screen with cosmetic settings

Operation steps:

Firstly, evenly place the samples to be tested into the sample tray

Secondly, cover the heating cover and press the “Start” button. The remaining work is automatically completed by the instrument. After the measurement is completed, the instrument will automatically alarm, and the measurement result will be locked on the LCD display screen.

Features:

1. No installation or debugging required, can be used by unboxing;

2. No need for training, simple operation, and saving tedious usage steps;

3. Short measurement time and high work efficiency;

4. Uniform heating, stable performance, and accurate testing;

5. Small in size and light in weight;

6. Fully automatic measurement, alarm reminder after measurement, no need to monitor the measurement process;

7. Widely used and almost suitable for moisture determination in various industries;

8. German imported sensors make instrument testing more excellent and accurate;

9. The unique wind shield design makes the instrument weighing system more stable;

10. The moisture and solid content of the sample can be converted simultaneously;

11. The heating chamber adopts a pure stainless steel chamber cover, which is high-temperature resistant and easy to clean.

Technical parameters: