Differential Scanning Calorimeter

Product introduction:

The differential scanning calorimeter is a touch screen type, which can perform glass transition temperature test, phase transition test, melting and thermal enthalpy test, thermal stability test, and oxidation induction period test.

Comply with the following standards:

GB/T 19466.2–2004/ISO 11357-2:1999 Part 2: Determination of glass transition temperature

GB/T 19466.3–2004/ISO 11357-3:1999 Part 3: Determination of melting and crystallization temperature and enthalpy

GB/T 19466.6-2009/ISO 11357-3:1999 Part 6: Determination of oxidation induction time and oxidation induction temperature

Technical parameters:

1. Temperature range: room temperature ~ 500℃

2. Temperature resolution: 0.01℃

3. Temperature fluctuation: ±0.1℃

4. Temperature repeatability: ±0.1℃

5. Heating rate: 0.1～100℃/min

6. Constant temperature time: recommended <24h

7. Temperature control method: heating, constant temperature (fully automatic program control)

8.DSC range: 0～±600mW

9.DSC resolution: 0.01mW

10.DSC sensitivity: 0.01mW

11. Working power supply: AC220V/50Hz or customized

12. Atmosphere control gas: nitrogen, oxygen (instrument automatically switches)

13. Gas flow: 0-300mL/min

14. Gas pressure: 0.2MPa

15. Display mode: 15-inch LCD touch screen display

16. Data interface: standard USB interface

17. Parameter standard: equipped with standard substances (indium, tin, zinc), users can calibrate the temperature by themselves

Technical features:

1. Industrial-grade 15-inch touch screen, completely free from the constraints of computers.

2. Electronic flow meter, more accurate flow recording.

3. The touch interface is independent of the display, which is more flexible.

4. The unique sealing of the furnace can provide good experimental conditions.

5. Automatically switch the two-way atmosphere flow, with fast switching speed and short stabilization time. At the same time, add one protective gas input.

6. The software is simple and easy to operate.