wholesale co2 in incubator for animal cell culture supplier factory of sale

The laboratory shaker, also known as the oscillator incubator, is a multi-purpose biochemical instrument that is used in experiments

that have high requirements on temperature and oscillation frequency, such as bacterial culture, biochemical reactions, fermentation,

enzyme organization and research, etc. . Suitable for plants, biology, microorganisms, genetics, environmental protection, medicine, chemical industry and other fields.

Key Features

•   Three-dimensional rocking motion with an angle of 9°

•   Max. load capacity is 5kg with platform

•   Speed range of 10-70rpm

•   Double LCDs for independent display of time and speed

•   Various of platform accessories

Before buying a laboratory shaker, you first need to understand these 5 most important questions:

1. What is the unit capacity (total weight and total volume) of the shake flask you need?

2. Are there any other included standard accessories?

3. What is the RPM range? What is the increment he can control?

4. What is the temperature and humidity required for the operating environment?

5. If there is programming function, what are its functions?

When using a common laboratory shaker, pay attention to the following aspects:

1. Use environment

Please ensure that the indoor temperature range is between 18°C ​​~ 34°C and the relative humidity is up to 90%

2. Positioning

Place the shaker on a surface or workbench capable of supporting the weight of the shaker and all associated parts

3. Parts installation

Installation of the flask clamp is accomplished by securing the base of the clamp to the platform using the correct

type and number of screws.

4. Power supply voltage

Please confirm that the local power supply voltage meets the requirements before use. It is recommended to connect

the device to a dedicated power supply with grounding protection installed.

5. Equipment leveling

Properly level the device by placing a bubble level on the top drive bearing housing

6. Standard operation

When the shaker rotates at high speed, in order to avoid large vibration of the instrument, the culture reagent bottles should

be placed symmetrically on the shaker, and the culture solution of each bottle should be roughly equal. Please fix the sample

firmly on the shaker, and make sure that the sample will not be shaken violently before leaving when the shaker is working.

During the sampling process, if any sample is found to be missing (including the drop of the plug), the main power should be

turned off, and the debris should be removed with tweezers as much as possible. If necessary, some parts should be disassembled

for cleaning. . It is forbidden to put the pipe rack made of plastic foam into the shaker, so as to avoid the foam particles being

sucked into the fan shaft, which will cause the fan to overheat and burn! When removing the sample, turn off the power or set the speed to zero.

7. Maintenance

The surface of the instrument should be scrubbed frequently to keep it clean, and the side of the instrument control box should

be avoided when scrubbing to avoid water dripping into the instrument and damaging the instrument. When the instrument is used

frequently, an appropriate amount of grease should be added every few months, and the fuse box, control elements and fastening screws

of the instrument should be checked regularly for looseness.