Digital high Frequency Magnetic Field Intensity Meter Indicator Electromagnetic radiation detector

Features:
This meter is designed as wide frequency to supervise high frequency transmission of range from 50MHz to 3.5GHz. It has the non-directional measurement feature and high sensitivity.  It can be used to measure electromagnetic field intense of the transverse electromagnetic wave cell and Absorber rooms. The unit and mode are selectable for purpose of using in limits defined in most of regulations. The measured value can be displayed in units of electric field intense, magnetic field intense and power density.
1.50 MHz to 3.5 GHz frequency range.
2.For isotropic measurements of electromagnetic fields.
3.Non-directional (isotropic) measurement with three-channel measurement probe.
4.High dynamic range due to three-channel digital results processing.
5.Configurable alarm threshold and memory function.
6.Easy to use.
Specifications:
Common Specifications
Measurement method：Digital, triaxial measurement
Directional characteristic：Isotropic, triaxial
Measurement range selection：One continuous range
Display resolution：0.1mV/m, 0.1 μA/m, 0.1 μW/m², 0.001 μW/cm²
Setting time：Typically 1s (0 to 90% of meas. value)
Display refresh rate：Typically 400mS
Display type：LCD 4 digit
Measurement units：mV/m, V/m , μA/m , mA/m , μW/m² , mW/m² , μW/cm²
Measurement display value：Instantaneous measured value, maximum value or average value since power-on.
Measurement alarm function：Adjustable threshold with ON/OFF e
Measurement calibration factor CAL：Adjustable
Manual data memory and read storage：99 sets (only recall by meter)
Battery：4 batteries of 9V
Battery life：>15 hours
Automatically power off: 15 minutes
Operation temperature range：0°C – +50°C
Operation humidity range：25% – 75%RH
Storage temperature range：-10°C – +60°C
Storage humidity range：0% – 80%RH
Dimension：261cm（Length）* 73cm（Width）*38cm（Height）
Weight（include batteries）：About 220g
Accessory:  9V battery, carrying case & manual