Soil sampling drill

Introduction:

The HM-QY800 single-person handheld soil sampling drill is a lightweight soil collection drill designed based on large hydraulic, gasoline, and pneumatic drills. Even drillers with no operating experience can operate it with simple training. The sampling process is very simple, and 1 to 2 people can complete the operation of the equipment. No water is required during the entire drilling process, which ensures the quality of the sample obtained (no pollution, no disturbance).

Compared with conventional large-scale drilling rigs, HM-QY800 is more convenient to carry and simpler to operate, and non-professional personnel can easily complete the operation of the equipment. In some project sites where the depth requirements are not high (within 10 meters), the terrain is relatively complex, and large equipment is difficult to reach, the use of this equipment is the best choice.

Compared with traditional hand drills, HM-QY800 drills deeper, has higher sampling efficiency, and obtains original, basically undisturbed and compressed (depending on the terrain) soil samples. When the sampling depth exceeds half a meter, the quality of the soil sample (original, undisturbed, and uncompressed) is required to be higher.

Features:

● Fast footage, samples remain in their original state without disturbance!

● Sampling can be done using the built-in PVC sampling tube, or directly!

● The ideal sampling depth for conventional soil layers is 1-5 meters, and the soft soil layer can reach 10 meters!

● Hand-pull start, instant stop trigger button, spring isolation and anti-vibration handle!

● The extractor adopts a more reasonable ergonomic design, which can be pressed by hand or stepped on!

Parameters:

1. Sampling depth: 1-10 meters (optional)

2. Vibration frequency: 1300 times/minute

3. Power: 1.6 horsepower (7000rpm)

4. Engine type: single-cylinder two-stroke engine

5. Fuel consumption: no more than 0.6L/h

6. Weight: 20.2kg (main engine)

7. Sample tube specifications: inner and outer diameters not less than 35mm/40mm; length not less than 1.00 meters/root

8. Sampling depth, you can connect the drill rod for one-time sampling without lifting the drill in the middle

9. Pulling device: fast pulling, speed not less than 3.00 meters/minute

Standard configuration:

One gasoline-powered engine, one set of engine tool kit, standard soil drill bit, hard soil drill bit optional, 5 drill rods not less than 1 meter, 2 plastic sample tubes not less than 1 meter, 1 scraper, pliers, earphones, 5M tape measure, gloves, cleaning brush, 1 set of special extraction equipment, 1 industrial plastic transport box