Three-cup anemometer – WD12/10
1,000.00৳
⛟ Stock products delivery time 1-3 working days. 🔥
✈ Out-of-stock products delivery time 10-20 working days. 🚀
☎️ Contact Us for any inquiry
- Mall catalog number: TS WD12/10
- Brand: Tsingsense
Three-cup Wind Speed and Wind Direction Meter-WD12/10 Three-Cup Wind Speed and Wind Direction Sensor Working Principle-Product Introduction
TS WD12/10 Wind Speed and Wind Direction Sensor is a set of sensors designed by our company to measure wind speed and wind direction according to industry standards
It has good performance, high reliability, high linear accuracy, long life, reliable operation, and its performance meets the recommended requirements of the Shi Jie Meteorological Organization for wind sensors.
Three-cup Wind Speed and Wind Direction Meter-WD12/10 Three-Cup Wind Speed and Wind Direction Sensor Working Principle-Product Features
◆ Strong anti-lightning interference ability
◆ Excellent resistance to impact, overload, impact and erosion
◆ Low wind start
◆ Wind load up to 6 0m/s
◆ Easy to carry and simple to install
Three-cup anemometer – WD12/10 three-cup anemometer working principle – technical indicators
| project | wind velocity | Wind |
| Start the wind speed | ≤0.5m/s | ≤0.5m/s |
| Measuring range | 0~50m/s (factory verification to 40m/s) | 0~360° |
| resolution | 0.1m/s | 1° |
| Damping ratio | 0.45 | 0.45 |
| Output signal form | 458 signal | 458 signal |
| Operating voltage | 12V | 12V |
| Operating current | <15mA | <15mA |
| Wind resistance | <60m/s | <60m/s |
| Ambient temperature | -40℃ ～ 60℃ | -40℃ ～ 60℃ |
| Ambient humidity | 0~100%RH | 0~100%RH |
Three-cup Wind Speed Direction Meter-WD12/10 Three-Cup Wind Speed Wind Direction Sensor Working Principle – Wind Rating
| Wind rating | Name | Features of features on land | Wind speed equivalent to 10 meters above flat ground (m/s) | |
| Scope | Average | |||
| 0 | No wind | Quiet, smoke straight up | 0.0—0.2 | 0 |
| 1 | Soft wind | Smoke can indicate the direction of the wind, and the leaves are slightly shaking | 0.3—1.5 | 1 |
| 2 | Light breeze | The wind was felt on the human face, the leaves were faintly rattled, the flags began to flutter, and the tall grass began to shake | 1.6—3.3 | 2 |
| 3 | Breeze | The leaves and twigs swayed, the flags unfurled, and the tall grass swayed | 3.4—5.4 | 4 |
| 4 | and wind | It can blow dust and paper from the ground, the branches of trees shake, and the tall grass undulates in waves | 5.5—7.9 | 7 |
| 5 | Fresh wind | Small leafy trees sway, inland water surface has small waves, and tall grass waves are noticeably undulating | 8.0—10.7 | 9 |
| 6 | Strong winds | The branches of the trees swayed, the wires whirred, the umbrellas were difficult, and the tall grass fell to the ground from time to time | 10.8—13.8 | 12 |
| 7 | Gales | The whole tree shakes, the large branches bend down, and it is inconvenient to walk in the wind | 13.9—17.1 | 16 |
| 8 | Gale | Small branches can be broken, and people feel great resistance when they move forward against the wind | 17.2—20.7 | 19 |
| 9 | Gale force | The grass house was damaged, the roof tiles were lifted, and the branches of large trees could be broken | 20.8—24.4 | 23 |
| 10 | Wind | Trees can be blown down, and buildings in general can be damaged | 24.5—28.4 | 26 |
| 11 | Storm | Large trees can be blown down, and buildings in general can be severely damaged | 28.5—32.6 | 31 |
| 12 | Hurricanes | Rare on land, its destructive power is extremely high | >32.6 | >33 |
Three-cup Wind Speed Sensor-WD12/10 Three-Cup Wind Speed and Wind Direction Sensor Working Principle-How to Use
(1) Wind speed and direction sensors should be installed vertically on the cross arms at a distance of more than 1 meter.
(2) The lower part of the sensor is sleeved on the mast with a diameter of less than φ60m, and the 120o is evenly divided into three M5 threads for the installation part.
(3) When the wind direction sensor is installed with the wind vane, the wind gauge should be passed through the wind vane cap of the head of the wind direction sensor, and the balance hammer should be installed on the side of the wind direction hat with the marker.
When the sensor is flattened and the wind bar is moved, the counterweight and the wind indicator are in a balanced position. When the wind vane is adjusted vertically and the ground after standing upright, tighten and fix the wind direction rod
The brake screws on the windsock cap will do.
(4) There is a north mark point on the upper shell of the wind direction sensor, which should be aimed at the north when installing.
(5) The wind direction sensor has been adjusted to zero, and the brake screw between the wind direction cap and the spindle is not allowed to be loosened at will.
(6) It is recommended that the wind sensor should be oiled once a year, and the wind speed frame or wind direction cap should be removed when the oil is injected, and the instrument oil should be injected from the upper bearing of the sensor.
Three-cup anemometer – WD12/10 three-cup anemometer working principle – factory standard
The WD12/10 mechanical wind velocity and direction sensor comes with the following components:
One mechanical wind speed sensor
One mechanical wind direction sensor
A copy of the instruction manual
One copy of the certificate of conformity
Warranty card: One copy
Packing list 1 copy
Three-cup Wind Speed and Wind Direction Meter-WD12/10 Three-Cup Wind Speed and Wind Direction Sensor Working Principle – Application Scenarios
Shipping Information
Out Of Dhaka: 1–3 working days for most locations within Bangladesh and cost only ৳120 TAKA.
Know more details.
Return Policy
You may return items purchased from Meter BD Shop within 7 days of receiving the product.
To be eligible for a return, the product must meet the following conditions:
1. Unused, 2. In the original packaging & 3. Proof of purchase.
Related products
Reviews
There are no reviews yet.