8 12 Channel Multi channel Pipette

8- and 12-channel pipette loading parts can be easily and conveniently replaced Ideal tool for continuous dispensing,
can be autoclaved and UV sterilized as a whole, safer to operate, widely used in molecular biology and immunoassays .
The multi-channel pipette has a separate piston design, each channel can be disassembled separately, and the number
of channels can be adjusted manually, which can meet the hole spacing of different consumables

The 8/12-channel pipette is a small liquid moving instrument in the chemical laboratory. Although its volume is small,

as one of the routine laboratory instruments, it still plays a significant role in the accuracy and reliability of our experimental results.

How to perform 8-channel pipette maintenance to achieve a longer service life?

1. Before the pipette is sterilized at high temperature, make sure that the pipette is resistant to high temperature.

2. When there is liquid in the pipette nozzle, it is strictly forbidden to place the pipette horizontally or upside down to prevent

the liquid from flowing into the piston chamber and corroding the pipette piston;

3. The pipette calibration can be carried out by repeating the method of weighing distilled water several times in an environment of 20-25 degrees.

4. Generally, the pipette gun of the pipette needs to be cleaned regularly. You can use soapy water or 60% isopropyl alcohol, then rinse with distilled water, and dry it naturally.

5. If it is not used for a long time, the range of the pipette should be adjusted to a large scale, so that the spring is in a relaxed state to protect the spring;

6. At the end of each use of the pipette, adjust the range of the pipette to the maximum scale and relax the spring.

7. Use the correct method to install the suction head, remember not to use too much force, and do not use the method of cutting the suction head to install;

When using the 8-channel pipette, check whether there is any leakage. In the method, suck the liquid and place it vertically for a few seconds to see if the liquid level drops.