Engine OiAnalyzer

is designed to measure the health condition of your oiand engine. The unique  sensor can measure the levels of acid and contamination from soot, dust, dirt, wear metals, fuel, water or antifreeze. Only a few drops of oican instantly telyou the condition of your oiand engine. It works with dieseor gas engine oils.
Features and Specifications:
– Quickly test the performance of gasoline or dieseoil
– Calibration function
– 128*64 LED display with background light
– 3.7V Li rechargeable battery with 1000mAh
Operating Instruction
1.  Turn the instrument on.
2.  Select the oimode by pressing the Up and Down button, and then press the Power/Next button as shown in   Fig.1.
3.  Put 3-5 drops of oito the bowof the instrument.
4.  Press the Power button. The result wilbe shown on the display inapproximately 15 seconds as shown in Fig.2.
Important：
•    Do not drop oion the sensor before turning on the unit. Make sure that the sensor and the inner surface of the boware clean and dry.
•   Do not test hot oil. For best results, the temperature of the oisample to be tested should be close to the temperature of the instrument, and both should be between10℃-27℃.
•    Place the instrument on a flat surface when testing.
•    Put 3-5 drops of oion the sensor untithe oisurface reaches the required height.