Non-intrusive pavement sensor – pavement shaped
⛟ Stock products delivery time 1-3 working days. 🔥
✈ Out-of-stock products delivery time 10-20 working days. 🚀
☎️ Contact Us for any inquiry
- Mall catalog number: TS RCS01
- Brand: Tsingsense
Local weather changes caused by rain, snow, and temperature differences between day and night often cause waterlogging, snow, and icy road surface conditions to occur on the highway surface. This in turn leads to traffic incidents
As a result, people’s lives and property have suffered serious losses. In order to reduce the impact of rainfall and snowfall on highway traffic, Tianxing Zhilian specializes in R&D and production
Pavement condition monitoring equipment, analysis and early warning of possible bad conditions, can improve the safety indicators of the expressway, and realize the informatization of the expressway system
Intelligence is of great significance.
Non-Intrusive Pavement Sensor – Pavement Condition Monitoring Sensor Product Introduction
The TS RCS01 non-intrusive pavement condition sensor uses a unique remote sensing multispectral measurement technology to accurately detect the thickness of ice, snow and water film on the road surface
Slippery degree. It can also monitor the road surface temperature element. Infrared detection up to 15.5 meters. This non-invasive detection means that there is no need for a traditional embedded sensor
When the road surface is damaged and traffic is closed, the RCS01 sensor can be detected by simply installing it on a roadside post from a distance. By providing information on pavement conditions, remote sensing
Pavement condition sensors provide road authorities with accurate monitoring data to take action before road safety hazards occur. It can be widely used in highways
Monitoring of urban roads, bridges, tunnels, airport runways and complex road surface conditions.
Non-Intrusive Pavement Sensor – Pavement Condition Monitoring Sensor Product Features
The TS RCS01 remotely sensed pavement condition sensor is based on the spectral measurement principle, which enables accurate measurement of water, ice and snow. and the measurement of the degree of slippage. With one
The infrared emitter is aimed at the selected position on the road surface, and the emitted light is reflected from the measured point into the receiver for integration. The sensor is able to distinguish between water or ice on the surface of the road
Fixed-wavelength reflections can also detect snow or frost.
Non-Intrusive Pavement Sensor – Pavement Condition Monitoring Sensor Product Features:
◆ Non-embedded design
◆ Maintenance-free, low-power design
◆ Infrared detection as far as 15.5 meters
◆ Sturdy design, all-weather measurement
◆ No need to close the lane, easy installation and maintenance
◆ Measure water, ice and snow on the road from a distance
◆ Measure the degree of stagnant water, ice surface, and slipperyness
◆ It can carry out continuous online measurement output on the road surface
◆ The digital output interface of the instrument is equipped with RS485 as standard, and has two communication protocols: Modbus and ASCII code
Non-Intrusive Pavement Sensor – Pavement Condition Monitoring Sensor Product Parameters
Monitor distances | 2~15 meters |
Detection diameter | 25.4 cm |
angle | 30~90 degrees |
Power input | 220VAC、12VDC |
Zui high power consumption | 4W |
Operating temperature | -40ºC ~+ 70ºC |
Operating humidity | 0 to 100% |
Pavement status output | Water: 0.00~10mm |
Ice: 0.00~10mm | |
Snow: 0.00~10mm | |
Slippery degree: 0.00~1 | |
Temperature: -70°C-260°C; Accuracy: 0.5°C (within 0-50°C);
Resolution: 0.1 °C |
|
precision | 0.01mm |
Lens contamination detection | Contamination level measurement and internal automatic contamination compensation for optical lenses |
pavement | Concrete, asphalt pavement |
communication | RS485 |
Average trouble-free | 1.5 x 1,000,000 hours |
safe | No safety concerns – infrared remote sensing measurement technology |
Non-Intrusive Pavement Sensors – Pavement condition monitoring sensors are factory-configured
Sensors 1 unit
A copy of the certificate/warranty card
Packing list 1 copy
Non-Invasive Pavement Sensors – Pavement Condition Monitoring Sensor Application Scenarios
Shandong Qingdao Highway Weather Station
Shandong Yantai Highway Meteorological Monitoring Project
Shipping Information
Out Of Dhaka: 1–3 working days for most locations within Bangladesh and cost only ৳120 TAKA.
Know more details.
Return Policy
You may return items purchased from Meter BD Shop within 7 days of receiving the product.
To be eligible for a return, the product must meet the following conditions:
1. Unused, 2. In the original packaging & 3. Proof of purchase.
Reviews
There are no reviews yet.