Be measured heat sealing temperature range of sealing compound, heat sealing strength, hot package of speed, heat sealing pressure, used for plastic, flexible packaging composite membrane, coated paper, foil.
Structure:
1. It contains air drive system, sealing devices, temperature-conditioning systems, time-conditioning systems
2. Air-driven system: Including pressure gauges, guide rods, cylinder, pneumatic valve, pressure regulator handles, so on. pull out the pressure regulator handle, turn right to increase the sealing pressure, a left turn can reduce the sealing pressure, after finishing the pressure setting and turn the handle to the host side to lockup the air pressure.
3. Sealing device Composed by the upper and lower sealing bars, upper rods connect with cylinder, and on the upper sealing bar has insulation panels, to prevent transmission of heat to the cylinder. Aluminum rod for sealing, heat sealing the central rod for the heater, above the heat sealing of the lower rod has silica gel plate, can ease the pressure at the time of the impact of heat sealing, back of heat sealing rods are equipped with body temperature.
4. Temperature Control System upper temperature controller control the upper sealing bars, lower control the lower sealing bar, by adjusting the dial on the button, can set temperature easily.
5. Time-conditioning systems Sealing time can be set up by adjusting the dial button with range 0.01s ~ 999.9h, in manual mode, press the foot pedal, sealing rods were pressed down; in automatic mode, the upper and lower sealing rods press time from the calculagraph control automatically, once automatic reset. Timer units typically 0.1 seconds, on the panel of the timer have the time adjustment button, sealing time adjustment can be done.
Technical parameters:
1. power supply: AC220V 50HZ;
2. compressed air: 6kg/cm ²;
3. Size: desktop 530mm × 300mm × 470mm(L*W*H); weight: desktop 47Kg;
4. seal area: 300mm × 10mm smooth (lower seal rod with silicon pad);
5. heat sealing temperature: room temperature ~ 300 ° C (accuracy ± 1 ° C);
6. heat sealing time: 0.01s ~ 999.9h;
7. heat sealing pressure: 0 ~ 0.8Mpa.
SKZ1017A One point Heat-seal Tester
14
Items sold in last 3 minutes
⛟ Stock products delivery time 1-3 working days. 🔥
✈ Out-of-stock products delivery time 10-20 working days. 🚀
☎️ Contact Us for any inquiry
15
People watching this product now!
Category: Lab Testing Equipment
Description
Shipping & Returns Policy
Shipping Information
Dhaka Only: Same-day or next-day delivery within Dhaka city limits and cost only ৳80 TAKA.
Out Of Dhaka: 1–3 working days for most locations within Bangladesh and cost only ৳120 TAKA.
Know more details.
Out Of Dhaka: 1–3 working days for most locations within Bangladesh and cost only ৳120 TAKA.
Know more details.
Return Policy
You may return items purchased from Meter BD Shop within 7 days of receiving the product.
To be eligible for a return, the product must meet the following conditions:
1. Unused, 2. In the original packaging & 3. Proof of purchase.
Be the first to review “SKZ1017A One point Heat-seal Tester” Cancel reply
Reviews
There are no reviews yet.