Pavement Condition Sensor Detection Principle – Road
⛟ Stock products delivery time 1-3 working days. 🔥
✈ Out-of-stock products delivery time 10-20 working days. 🚀
☎️ Contact Us for any inquiry
- Mall catalog number: TS RCS01
- Brand: Tsingsense
- Voltage: Unlimited
- Excitation power supply: unlimited
- Data Storage: Unlimited
- Average power consumption: Unlimited
- Sleep power consumption: Unlimited
- Operating temperature: unlimited
- Operating humidity: unlimited
- Communication interface: unlimited
The smooth flow and safety of urban traffic has a great impact on weather conditions, and in many cases, bad weather such as ice, snow, fog, etc. is the cause of slow traffic and accidents.
In order to better manage traffic safety under various weather conditions for traffic management departments and road management departments, Beijing Tianxing Zhilian has specially developed and designed a vehicle that can be carried out
It is a monitoring instrument to monitor road icing, snow cover, water film thickness and slippery degree. It is widely used to monitor the condition of urban expressways, highways or airport runways.
Pavement Condition Sensor Detection Principle – Pavement Ice Sensor Product Introduction
TS RCS01 non-intrusive pavement condition sensor is a product developed and produced by our company, which can monitor the thickness and slippery degree of ice, snow and water on the road surface
24-hour continuous online monitoring equipment. The device uses multispectral measurement technology, and the infrared detection can reach 15.5 meters. Remote sensing installation means that there is no need to close the road
There is no need to cut the road surface, and the installation work is safe and convenient. Compared to traditional buried pavement sensors, the TS RCS01 remotely sensed pavement condition sensor avoids both resources
waste, which also reduces maintenance costs. The equipment uses RS485 communication interface, with Modbus and ASCII code communication protocols. It can be widely used in highways and urban roads
Monitoring of roads, bridges, tunnels, airport runways and sections with complex road conditions.
Pavement Condition Sensor Detection Principle – Pavement Ice Sensor Detection Principle
The TS RCS01 non-intrusive pavement condition sensor is based on the spectral measurement principle, which enables accurate measurement of the amount of water, ice and snow. and the measurement of the degree of slippage. With one
The infrared emitters are aimed at the selected position on the road surface, and the emitted light is reflected from the measured point into the receiver for integration. The sensor is able to distinguish between water or ice on the surface of the road
Reflections of specific wavelengths can also detect snow or frost.
Pavement Condition Sensor Detection Principle – Pavement Ice Sensor Product Function
◆ Infrared detection as far as 15.5 meters
◆ Measure water, ice and snow on the road from a distance
◆ Measure the degree of stagnant water, ice surface, and slipperyness
◆ It can carry out continuous online measurement output on the road surface
◆ The digital output interface of the instrument is equipped with RS485 as standard, and has two communication protocols: Modbus and ASCII code
Pavement Condition Sensor Detection Principle – Advantages of Pavement Ice Sensor Products
◆ Non-embedded design
◆ Maintenance-free, low-power design
◆ Sturdy design, all-weather measurement
◆ No need to close the lane, easy installation and maintenance
Pavement condition sensor detection principle – technical parameters of pavement icing sensor
Monitor distances | 2~15 meters |
Detection diameter | 25.4 cm |
angle | 30~90 degrees |
Power input | 220VAC、12VDC |
Zui high power consumption | 4W |
Operating temperature | -40ºC ~+ 70ºC |
Operating humidity | 0 to 100% |
Pavement status output | Water: 0.00~10mm |
Ice: 0.00~10mm | |
Snow: 0.00~10mm | |
Slippery degree: 0.00~1 | |
Temperature: -70°C-260°C; Accuracy: 0.5°C (within 0-50°C);
Resolution: 0.1 °C |
|
precision | 0.01mm |
Lens contamination detection | Contamination level measurement and internal automatic contamination compensation for optical lenses |
pavement | Concrete, asphalt pavement |
communication | RS485 |
Average trouble-free | 1.5 x 1,000,000 hours |
safe | No safety concerns – infrared remote sensing measurement technology |
Pavement Condition Sensor Detection Principle – Pavement Ice Sensor Factory Configuration
Sensors 1 unit
A copy of the certificate/warranty card
Packing list 1 copy
Pavement Condition Sensor Detection Principle – Pavement Ice Sensor Application Scenario
Shandong Province Rongwu Expressway – Rongcheng – Weihai – Yantai – Xinhe – Dongying – Huanghua – Tianjin – Bazhou – Laiyuan – Shuozhou – Ordos – Wuhai
Shandong Qingdao Highway Weather Station
Shipping Information
Out Of Dhaka: 1–3 working days for most locations within Bangladesh and cost only ৳120 TAKA.
Know more details.
Return Policy
You may return items purchased from Meter BD Shop within 7 days of receiving the product.
To be eligible for a return, the product must meet the following conditions:
1. Unused, 2. In the original packaging & 3. Proof of purchase.
Reviews
There are no reviews yet.